I've emailed Tim - but haven't heard back yet
Cheers
Fractured Axel
Sport, Trick and Freestyle Kite Flying Forum
-
- SkyRags
- Posts: 188
- Joined:
- Location: On Raumati Beach, New Zealand...preferably ALWAYS
SuperFly LLE dimensions
Can anyone give me the exact dimensions of the LLE on a SuperFly?- the entire spar that originally connects to the ULE initially?
I've emailed Tim - but haven't heard back yet
Cheers
I've emailed Tim - but haven't heard back yet
Cheers
In the bag : KaoS Kites; Charisma, Benson SuperFly, Jest of Eve Talon UL
-
- Stephen Hoath
- Posts: 85
- Joined:
- Contact:
Re: SuperFly LLE dimensions
If you still have the other side you could always measure that one.
Stephen Hoath
-
-
Craig
Site Admin and Supporter
- Posts: 5242
- Joined:
- Location: Epsom Downs, near the red cross.
Re: SuperFly LLE dimensions
685mm Skyshark 5PT
-
-
fworley
FA Supporter
- Posts: 2236
- Joined:
- Location: Under A Bridge
- Contact:
Re: SuperFly LLE dimensions
Stephen Hoath wrote:If you still have the other side you could always measure that one.
There's an idea
-Frazer
-
- seales
- Posts: 67
- Joined:
- Location: Bristol / Fleet, Hants
Re: SuperFly LLE dimensions
You might have already thought of it, but make sure (if it's not full length) you trim from the smaller end. Interface with the ferrule is the important bit.
-
- SkyRags
- Posts: 188
- Joined:
- Location: On Raumati Beach, New Zealand...preferably ALWAYS
Re: SuperFly LLE dimensions
fworley wrote:Stephen Hoath wrote:If you still have the other side you could always measure that one.
There's an idea
-Frazer
AH!
But what if I didn't?
....incidentally I do
In the bag : KaoS Kites; Charisma, Benson SuperFly, Jest of Eve Talon UL
-
- SteveC
- Posts: 762
- Joined:
- Location: Lincolnshire
Re: SuperFly LLE dimensions
SkyRags wrote:fworley wrote:Stephen Hoath wrote:If you still have the other side you could always measure that one.
There's an idea
-Frazer
AH!
But what if I didn't?
....incidentally I do
First thing I do with any new kite is to take a piece of paper and measure all the spar lengths, all the bridle lengths, measure how far the fitting are down the LE, if the bridle goes above or below the fittings EVERYTHING - even take a few photos. Then when something breaks or you've played around with the bridle settings and it's gone wrong you have all the stock details to hand in a folder on the bookshelf.
Current Bag:- HQ Shadow, Spiderkites Zodarion, Flying Wings Soul, Old blue HQ Jive , 'PAW' modded HQ Maestro II, Delta Hawk,
-
- SkyRags
- Posts: 188
- Joined:
- Location: On Raumati Beach, New Zealand...preferably ALWAYS
Re: SuperFly LLE dimensions
SteveC wrote:SkyRags wrote:fworley wrote:Stephen Hoath wrote:If you still have the other side you could always measure that one.
There's an idea
-Frazer
AH!
But what if I didn't?
....incidentally I do
First thing I do with any new kite is to take a piece of paper and measure all the spar lengths, all the bridle lengths, measure how far the fitting are down the LE, if the bridle goes above or below the fittings EVERYTHING - even take a few photos. Then when something breaks or you've played around with the bridle settings and it's gone wrong you have all the stock details to hand in a folder on the bookshelf.
Haha - typical forums
Always giving the best pre-crisis advice post crisis
Great idea though- I'm gonna do that from now on cheers
In the bag : KaoS Kites; Charisma, Benson SuperFly, Jest of Eve Talon UL