So as I mentioned in my last post on the Nazko build thread, my third build will be the L`Organic by C. Derefat.
I won`t go into too much detail about the construction as I`ve covered that in the other thread so this will just be a few pics of the progress and some of the final finished kite
So the sail almost finished as I`m waiting for some Dacron for the leading edge, I ran out but had enough to do the spine, small nosebag and the back of the stand-offs (the front of the stand-off re-inf is black 42gsm ripstop as is the trailing edge).
I`ve mixed materials again
The Black centre and very tips are 42gsm, the Royal Blue outer centre is 42gsm, the White, Dark Grey and Sky Blue is "Icarex" so looking at the panels I guess this kite uses more "Icarex" than not and will be framed along the Std lines of L Edges/ Easton 500 (P200 equivilent), Spine/ Easton 400 (P300 equivilent), U Spreader/ 6mm pultruded, L Spreaders/ Skyshark 5PT and all fittings APA of course.
Going to be a week or so until I can finish and test it as I`ll be waiting for the sticks and connectors so I might have a go at doing my own design of kite in the mean time using a "known" sail design such as L`organic or Nazko (or maybe combine both to make a Nazganic!! ) and designing the panels direct onto the outline.
Hmmm won`t let me upload as it said "the board attachments quota has been reached"? so I`ll post this anyway and try again later via edit